banner



How To Install Windows Xp On Pendrive

How to Setup Windows XP from USB bulldoze?

You are hither:  Tutorials > How to setup Windows XP from USB drive?

Step1: Creating Rescue USB Drive

First, we need create a rescue USB bulldoze which can boot the computer. Please follow the steps,

  1. Run PowerISO rescue media utility. You can download information technology here. On Windows Vista or higher up operating organisation, you may demand confirm the UAC dialog to continue.

  2. Insert the USB bulldoze you intend to kick from.

  3. The utility will allow you choose Windows PE compages and version. Information technology is suggested to select 32-chip architecture and Windows PE 3.11. Click "Next" to continue.

  4. Select USB bulldoze for output device, and select the correct drive from the list. Click "Side by side" to continue.

  5. The utility will get-go creating rescue USB drive. Information technology volition check necessary component and automatically download missing component from the server.

    Delight find that all existing information on the USB drive volition be destroyed during this footstep. The program will alert you before writing the USB drive. Click "OK" to continue.

  6. When it's done, copy the Windows XP setup files to the USB drive. Please notation that you'll only need the i386 binder.

If no errors occurred in the to a higher place process, you should now be all gear up to setup Windows XP from USB drive!

Step 2: Configuring the BIOS

You should now reboot and get into the BIOS configuration to kicking from USB. Instructions for doing so vary wildly from organization to system, merely generally entail the following:

  1. Reboot the organisation.

  2. While booting (earlier Windows starts loading), get into the BIOS configuration screen past hit something like F1, F2, Delete or Escape. Hotkey instructions are generally provided on the screen.

  3. Go to the section that contains your kick devices.

  4. With your USB drive plugged in, the USB bulldoze should be listed. If it isn�t, your organization might not support booting from USB. Bold that it is supported (as is the case with virtually all modern hardware), promote your USB drive to the primary kicking device.

  5. Go out from the BIOS configuration, saving all changes.

Please notice that you can seriously screw up your system by providing incorrect BIOS settings!

Step three: Booting from rescue USB drive

Assuming that you properly configured your BIOS and your USB bulldoze supports booting, your computer should now boot from the the rescue USB drive. Depending on the speed of your USB drive, this may have a while.

If it isn�t working, then double-check the following earlier making a scene:

  • Is your BIOS properly configured for booting from the USB device? (Is the USB device listed and does it have elevation priority?)

  • Have you correctly prepared the USB drive in pace one? (Restart the procedure.)

  • Does your USB drive properly back up being booted from? (Attempt another 1!)

Pace 4: Prepping the Hard Deejay

You need to brand certain that your difficult drive is partitioned and formatted properly. Especially if yous've had Linux or some other operating organisation on it, you'll need to repartition and format information technology. The rescue drive contain file manager and command line utility. Y'all can launch DiskPart for disk partitioning and formatting from the control utility.

If you lot are certain that your hard drive is set up properly (i.due east. it has only run Windows, it contains a valid Fat or NTFS partition) so y'all can safe yourself the hassle and skip this stride.

Window XP doesn't support GPT sectionalisation. If your hard drive is partitioned in GPT way, you likewise demand repartition and format the disc.

To repartition and format (This procedure will destroy any information on the hard drive):

  1. Click the icon on job bar to launch a command line Window.

  2. Enter DiskPart to run the built-in disk management utility.

  3. Enter the commands needed to repartition and format your drive. For example, endeavor the following:

select disk 0 (select the kickoff disk. On your computer, disk 0 may not be the right disk, yous tin can use "list disk" to find the correct disk.)

clean (purges the entire drive, essentially resetting it)

create partition primary (creates a single partition from the entire disk)

select partition1 (select the partition created)

format fs=ntfs quick (format the sectionalisation to NTFS organization, and do a chop-chop format)

assign (assign the segmentation a bulldoze letter)

get out (quits DiskPart).

Pace five: Launching Windows XP Setup from USB drive

With your bulldoze all ready, you tin at present launch the Windows XP setup with a few custom parameters. Let's assume that the files are available at E:\i386.

Plugging in a device now won�t work. Think that all USB devices volition need to be plugged in right from the starting time while using the rescue drive.

Run the following command:

  1. Run E:\i386\winnt32.exe /syspart:C: /tempdrive:C: /makelocalsource. Replace C: with the bulldoze you lot want to install Windows to.

  2. Proceed with the installation. If asked to convert the installation volume to NTFS, reply No. The setup program incorrectly believes that your USB drive (if is formatted as FAT) needs conversion.

The setup program volition then silently close, which might make you think that something went wrong. Don't worry though.

Pace 6: Continue Windows XP Setup from Hard disk

  1. Reboot your system.

  2. Unplug USB drive during post stage.

  3. Change your BIOS settings back to boot from difficult deejay again every bit needed.

  4. Yous can now continue to terminate setting up Windows XP.

Note: The above guide works with Windows XP only. For Windows 10, Windows 7, Windows 8 / 8.i, or Windows Vista operating systems, delight refer to another guide at http://www.poweriso.com/tutorials/how-to-brand-win7-bootable-usb-drive.htm .

Copyright 2004-2022 Power Software Ltd. All rights reserved.

Source: https://www.poweriso.com/tutorials/how-to-make-winxp-bootable-usb-drive.htm

Posted by: hareouste1951.blogspot.com

0 Response to "How To Install Windows Xp On Pendrive"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel